Presses
The heat press transforms plastics into homogeneous and resistant sheets thanks to its heating elements that optimize heat distribution, with precise temperature and pressure settings. Combined with the V4 heat press, the cold press, equipped with an active water circuit, keeps the sheets under pressure to prevent deformation and accelerates cooling, thus allowing daily production of up to 190 kg with a perfect finish.
Plate dimensions 135 x 135 cm
Plate thickness 5 to 35 mm
V4 heat press
The Carbon Blue V4 heat press allows you to transform your plastics into solid and homogeneous sheets, combining power and precision. Thanks to its 48 heating zones controlled by 16 temperature regulation zones, it guarantees optimal heat distribution, suitable for both recycling workshops and larger production projects. Equipped with a hydraulic cylinder, the press ensures uniform compression and perfectly closed maintenance of the sheet throughout the curing phase, for a high-quality end result. In combination with the V3 cold press, this set will allow you to produce up to 190 kg of sheets per day.
Tension | 380V |
Power | 17 kW |
Heating | 48 resistors / 16 zones |
Temperature | Up to 300°C |
Weight | 800 kg |
Dimensions | 155 x 155 x 140 cm |
Plate dimensions 135 x 135 cm
Plate thickness 5 to 35 mm
Cold Press V3
The Carbon Blue V3 cold press takes over at the end of the hot press's firing cycle to ensure rapid and even cooling of the plates. Thanks to its active cooling system, using water or air circulation, it brings the material back to temperature in a time equivalent to that of firing, i.e. up to twice as fast as conventional cooling at room temperature.
This time saving doubles output while ensuring dimensional stability and impeccable finishing quality. Robust, reliable, and designed for intensive use, the V3 integrates perfectly into a continuous production line. Combined with the V4 heat press, it can achieve a production capacity of up to 190 kg of plates per day, while optimizing cycles and workshop comfort.
Power | 1.5 kW |
Tension | 380V |
Weight | 750 kg |
Dimensions | 155 x 155 x 140 cm |
Platform dimensions 135 x 135 cm
Weighing capacity 240 kg
Weighing table 150
The 150 weighing table allows for precise dosing of the material before molding, guaranteeing a homogeneous and optimized filling at each cycle. Integrated directly into the preparation line, it ensures rigorous control of the quantities introduced into the molds, a key step in obtaining consistent and quality plates.
Power | 0.8 kW |
Tension | 220V |
Weight | 150 kg |
Dimensions | 155 x 155 x 170 cm |
Preparation table 150
The Jack 150 preparation table offers an ergonomic and versatile solution for lifting loads up to 150 kg, with an adjustable height from 40 to 180 cm. Designed to adapt to different workstations, it facilitates the loading of hot presses or the unloading of cold presses.
Weight | 325 kg |
Tension | On battery |
Power | 0.8 kW |
Dimensions | 150 x 180 x 45 to 180 cm |